Shop

	Board of the Oberheim SEM VCF clone Extreme sound range from very smooth to very bitchy Separate and parallel inputs from VCO waveforms (PULSE, RAMP) Selectable separate and parallel inputs for modulation sources Separate and parallel outputs for HIGHPASS, BANDPASS and LOWPASS Part of the Oberheim SEM Clone project Extracted VCF sub function Can be used as stand-alone Module Contains VCO mixer functions additionally like the original: - Morphing capability PULSE <=> RAMP	Euro 25.00	Frontpanel example
	Board of the Oberheim SEM LFO clone Part of the Oberheim SEM Clone project Extracted LFO sub function Can be used as stand-alone Module Can be retriggered / reset by a TRIGGER input Contains additional functions: - LFO out display LED - LED ON/OFF via GATE input to indicate voice selection in a polyphonic context	Euro 25.00	Frontpanel example
	Board of the Oberheim SEM VCA clone Part of the Oberheim SEM Clone project Extracted VCA sub function Can be used as stand-alone Module Contains VCF functions additionally like the original: - Morphing capability LP <=> Notch <=> HP - Toggle switch BP <=> Notch	Euro 25.00	Frontpanel example
	Board of the Oberheim SEM ENV clone Part of the Oberheim SEM Clone project Extracted ENV sub function Can be used as stand-alone Module Can be triggered / set by a TRIGGER or GATE input resulting in an ADS or AR function Contains additional functions: - ENV out display LED	Euro 25.00	Frontpanel example
	Board of the Analogmonster AC/DC Mixer module Universal control voltage and audio signal mixer DC coupled 2 mixer banks with 4 channels each Inverted and non-inverted outputs each Cascadable Helper module for the Oberheim SEM Clone project	Euro 25.00	Frontpanel example
	Board of the Analogmonster T908 AUTOTUNE module plus programmed ATmega8535 controller Autotunes any VCO from outside / non-invasive MIDI based Autotune online (during play) and offline (like Memorymoog) capabilities EEPROM storage of determined delta CVs Can be added to any modular system or used as stand-alone unit	Euro 50.00	Frontpanel example
	Board of the TCP3 Frontpanel Module Part of the Moog System 55 Clone project Control voltage router for 3 internal and 1 external control voltage(s), the last provided with attenuator 4 channel dc coupled mono cv and audio mixer with attenuators 2 phase inverted and 2 non phase inverted outputs with attenuator Original Moog circuit	Euro 25.00	Frontpanel example: The four mono 3.5 mm to 6.3 mm jack bush interface blocks are just passive front panel wiring, no circuit behind
	Board of the TCP3 VCA extension Customer request for enhancing a (T)CP3(A) Frontpanel Module by making it voltage controllable Satellite PCB for e.g. (T)CP3(A) main board or others Post installable / retrofit DC coupled inputs and outputs Can be used as stand-alone VCA as well Optional integration support	Euro 25.00	Usage example: One interface jack bush pair is used as CV input, one positive output jack bush is used as voltage controlled output
	Board of the T960 Sequential Controller plus programmed ATmega8535 controller All functions of the Moog 960 Sequential controller + 16x1 steps + 24x1 steps S-trigger and V-trigger out MIDI capabilities Ratcheting functions	Euro 75.00	Frontpanel example
	Board of the TAMP Amplifier Cascade Cascadable amplifier stages for modular integration of weak signals Each stage has an amplification of nearly factor 10 (Uout = -9.09 x Uin) DC coupled stages for amplification of control voltages and audio material	Euro 25.00	Frontpanel example
	Board of TOUT mixer and output module, version 2 2 stereo line ouputs 2 stereo headphone outputs 8 mono mixer inputs, grouped to 4 stereo input channels can be used as monitor without any external mixer equipment	Euro 25.00	Frontpanel example:
	Complete inductor set of a T914 Fixed Filter Bank (inductors only, no PCB)	Euro 269.00	Frontpanel example
	Complete inductor set of a T907 Fixed Filter Bank (inductors only, no PCB)	Euro 199.00	Frontpanel example